Connecting The Bru-300/300P Optical Multiplex Unit - Sony RM-BR300 Mode D'emploi

Connecting the BRU-300/300P
Optical Multiplex Unit
You can control the camera using this unit via the BRU-
300/300P Optical Multiplex Unit (not supplied).
1 2 3
OFF ON
IR SELECT
75
EXT SYNC IN VIDEO
BRBK-303 Optical
Multiplex Card
CAMERA
T VIDEO
(or S VIDEO)
75-ohm coaxial
cable (or S-
video cable)
Video monitor, etc.
* The VISCA RS-422 connection is also available if you use the
VISCA RS-422 connectors.
For other cameras, you can also use a matching Optical
Multiplex Unit to control the camera with this unit. For
14
GB
Connections
Camera BRC-300/300P
1 2 3 4 5 6 7 8 9
!
VISCA RS-422
to AC outlet
DC IN
S VIDEO IN VISCA RS-232C OUT 12V
CCFC-M100 Optical
Fiber Cable
to AC outlet
AC power cord
(supplied with the
BRU-300/300P)
BRU-300/300P
Optical Multiplex
Unit
VISCA RS-232C IN
RS-232C cable
(supplied)*
(SONY: 1-590-879-33)
VISCA RS-232C
to AC outlet
details on connection, refer to the Operating Instructions
supplied with your camera.
Notes
When using the VISCA RS-232C connectors or VISCA
RS-422 connectors, check the VISCA FUNCTION
switch on the rear of the Optical Multiplex Unit and the
DIP switch on the bottom of this unit (page 9) are set to
RS-232C or RS-422 correctly.