Precautions; Location And Function Of Parts - Sony RM-BR300 Mode D'emploi

Precautions

Operating or storage location
Operating or storing the unit in the following locations
may cause damage to the unit:
• Extremely hot or cold places (Operating temperature:
° ° °
0 C to 40 C [32 F to 104
• Exposed in direct sunlight for a long time, or close to
heating equipment (e.g., near heaters)
• Close to sources of strong magnetism
• Close to sources of powerful electromagnetic
radiation, such as radios or TV transmitters
• Locations subject to strong vibration or shock
Ventilation
To prevent heat buildup, do not block air circulation
around the unit.
Transportation
When transporting the unit, repack it as originally
packed at the factory or in materials equal in quality.
Cleaning
• Use a soft, dry cloth to clean the external surfaces of
the unit. Stubborn stains can be removed using a soft
cloth dampened with a small quantity of detergent
solution, then wipe dry.
• Do not use volatile solvents such as alcohol, benzene
or thinners as they may damage the surface finishes.
°
F])
Location and Function
of Parts
This manual is based on operation of the RM-BR300
when used with a BRC series Color Video Camera.
Front
8 90qaqsqd
1
VALUE
LOCK
PANEL BLACK PAN-TILT
LIGHT LIGHT RESET
2
RESET
– +
R
PRESET POSITION
MODE
BRIGHT
1 2 3 4
3 SHIFT
9 10 11 12
STD REV
– +
L/R
B DIRECTION
4 CAMERA
AUTO
FOCUS
AUTO 1 2 3 4
POWER
MANUAL
5
ONE PUSH
NEAR FAR AF
6
7
qhqjqk ql
A LOCK button and indicator
Press the LOCK button for more than one second,
and the LOCK indicator lights and the values set by
the VALUE/R, BRIGHT/B and FOCUS controls
are locked. (The indicators of the locked controls
are turned off.).
The AUTO/MANUAL button is also disabled.
Press the LOCK button for more than one second
again to unlock the controls and buttons.
B VALUE/R control
When the brightness adjustment mode is
selected with the MODE button (with the
VALUE indicator lit):
This control adjusts the value of the item
(SHUTTER or IRIS) selected on the camera.
When the VALUE indicator is lit, the function of
the control varies according to the exposure mode
selected on the camera. For details, see "Functions
of the VALUE and BRIGHT controls" on page 6.
When the white balance adjustment mode is
selected with the MODE button (with the R
indicator lit):
This control adjusts the R. GAIN (red gain) (except
the EVI-D30/D30P).
When the BRC-H900, BRC-H700, BRC-Z700 or
BRC-Z330 camera is connected, the function of the
control with the R indicator lit varies according to
the white balance mode selected on the camera. For
details, see "Functions of the R and B controls for
the BRC-H900, BRC-H700, BRC-Z700 and BRC-
Z330 cameras" on page 6.
Precautions / Location and Function of Parts
qf qg
ONE PUSH
MENU
AWB
5 6 7 8
13 14 15 16
5 6 7
w;
5
GB