Ordering Information - Blatchford Silcare Breathe SBTTLP22L Instructions D'utilisation

13 Ordering Information

Order Example
SBTTLP 26
Size
(22–40)
Small Valve Kit
Medium Valve Kit
Large Valve Kit
Extra Large Valve Kit
Casting Dummy
* SBTTLP23L is for size 23.5. SBTTLP26L is for size 26.5.
Liability
The manufacturer recommends using the device only under the specified conditions and for
the intended purposes. The device must be maintained according to the instructions for use
supplied with the device. The manufacturer is not liable for damage caused by the component
combinations that were not authorized by the manufacturer.
CE Conformity
This product meets the requirements of 93/42/EEC guidelines for medical products. This product
has been classified as a Class 1 Product according to the classification criteria outlined in
Appendix IX of the guidelines. The Declaration of Conformity was therefore created by Blatchford
Products Limited with sole responsibility according to Appendix VII of the guidelines.
Warranty
This device warranted for 6 months.
The user should be aware that changes or modifications not expressly approved could void the
warranty, operating licenses, and exemptions.
See the Blatchford website for the current full warranty statement.
Manufacturer's Registered Address
Blatchford Products Limited, Lister Road, Basingstoke RG22 4AH, UK.
Silcare Breathe and Blatchford are registered trademarks of Blatchford Products Limited.
SBTTLP26L*
L
Part Part Number
559015
559016
559017
559018
559019
9
938398/2-0719