Table des Matières
Publicité
K40507/E
Video entryphone 40507
The instructions manual can be downloaded from the website www.
vimar.com
Description
Wall-mount handsfree video entryphone for Due Fili Plus system,
integrated Wi-Fi for call repetition on smartphone with dedicated app,
with 7" touch-screen colour LCD display, capacitive keypad for video
entryphone functions and intercom calls, video voicemail, induction loop
for hearing aids, complete with bracket for fixing in round or rectangular
mounting box.
Desktop installation is possible with the desktop base accessory 40195
(sold separately).
Technical characteristics
• Wall-mounted, with metal bracket, in box: circular 2M (Vimar V71701),
3M (Vimar V71303, V71703) horizontal and vertical, 4+4M (Vimar
V71318, V71718) and square, British standard.
• 7" LCD 16:9 display, resolution 800x480 pixels
• Minimum video signal level on the bus for reception: -20 dBm
• Capacitive touch keypad with backlit symbols.
• Powered from BUS terminals 1, 2 - nominal voltage 28Vdc
• Power consumption:
- in standby: 120 mA
- maximum current: 400 mA
• Frequency bands: 802.11 b, g, n, 2.4 GHz
• Frequency range: 2412 - 2472 MHz
• RF Output power: < 100 mW (20 dBm)
• Ambient class: Class A1 (indoor use)
• IP30 protection rating
• Operating temperature: -5°C to +40°C (indoor use)
• Operating ambient humidity 10 - 80% (non-condensing)
• Electronic ringer with 10 different melodies.
• Input for landing call.
• Input for additional power supply: only code Elvox 6923, 28Vdc 0.5A
INT
• Dimensions: 165.8 x 184 x 24.2 mm
• DIP switch for line termination impedance.
Main functions
• Receiving video calls from speech unit.
• Speech unit self-starting.
• Speech unit lock opening.
• Intercom audio calls.
• Activating system actuations (stair light, auxiliary functions).
• System contacts list and favourites menu for quick access.
• Configurable video voicemail.
• Multiple ringtones, configurable from those available in the device.
• Adjust audio and video call settings.
• Input for landing bell.
• Mounting frame for CCTV integration.
• Mounting frame for remote call service on smartphone/tablet via WiFi
connectivity.
Audio frequency function for hearing aids
The video entryphone can be used by people wearing hearing aids.
For correct functioning of the hearing aid, please refer to its instruction
manual. Any metal objects or electronic equipment in the vicinity may
affect the quality of the sound received by the hearing aid.
Maintenance
Clean using a soft cloth. Do not pour water onto the appliance and do not
use any type of chemical product.
Cleaning must be carried out either with the apparatus powered off (=
disconnected from the bus) or after activating the keypad cleaning
procedure (see the relative paragraph in the User Manual).
Warnings for the user
Do not open or tamper with the appliance.
In the event of faults, contact specialized personnel.
10
Organization of the Home page
The Home page TAB 7S video entryphone is comprised of 2 main
sections: the top bar (black bar at the top), which cannot be personalized,
and the remaining part underneath, known as the Applications section,
which can be personalized.
Top bar section
The top bar includes the command:
-
, which gives access to the settings section (on which more
information is given later on in this manual);
The icons shown on the right of the top bar serve to inform the user of
the operating status of the most critical services of the device.
- a.
, if present in the top bar highlighted in white, the device is
in "DND" mode (Do Not Disturb). No calls will be accepted from the
entry panel. The user will receive an appropriate acoustic signal on the
entry panel; if in grey it means that the option has been selected, but
there are no conditions in place that enable it, for example, the "Do Not
Ring" option was previously selected.
- b.
, if present in the top bar highlighted in white, the device is in
"Do Not Ring" mode. No intercom calls will make the device ring; if
in grey it means that the option has been selected, but there are no
conditions in place that make it operative, for example, the "Do Not
Disturb" option was previously selected.
- c.
, if present in the top bar highlighted in white it means that the
video voicemail is active; if in grey it means that the option has been
selected, but there are no conditions in place that enable it, for exam-
ple, the "Do Not Disturb" option was previously selected.
- d.
, if present in the top bar highlighted in white, the device
works as a professional firm, i.e. the door opens automatically when
the call is made during the time intervals defined by the user; if in grey
it means that the option has been selected, but there are no conditions
in place that enable it, for example, no automatic opening programme
has been defined.
- e.
, if present in the top bar and highlighted in white, the call
is forwarded to a mobile device. In this case the TAB 7S will not ring
when a call is made; if in grey it means that the option has been select-
ed, but there are no conditions in place that enable it, for example no
mobile device has been defined for forwarding the call.
- f.
, shows the wi-fi signal strength and the status of the cloud
connection.
Quick Commands
On the lower edge of the touch screen there is a button (
which you can view all the quick commands for activating the video
voicemail, professional studio mode, call forwarding, DND mode (for calls
from the entry panel) and ringer mute function (for intercom calls).
The functions block will occupy the area reserved for applications.
Key functions
P1) Talk/Listen button
P2) Lock button
For further information, refer to the User Manual, which can be
downloaded from the website www.vimar.com
EN
) from
Publicité
Table des Matières
