Cleaning And Maintenance - Roller Grill VITROCERAMIQUE Série Notice D'installation Et D'utilisation

Stopping the appliance
Set the thermostat control knob (n°2 on picture) and the o/off switch (n°1 on
picture) on 0: the appliance is no longer functioning.
Let the device cool
Disconnect the power cable.
Clean the appliance. (see 6. Cleaning)
d) Breakdown / repair:
In case of breakdown or of damaged part, please call your after-sales service and
confide any technical operation to qualified person.
When you contact the after-sales service of your distributor or your store, give him
the complete reference of your device (commercial name, type and serial number).
This information appears on the visible descriptive plate behind the device.

6. CLEANING AND MAINTENANCE

Disconnect the device.
Let cool completely the device before any technical intervention or cleaning.
Clean regularly the external walls of your device with warm water and wash liquid:
avoid the abrasive towelling. Rinse your device with a wet sponge.
The residues of cooking get through the hole situated on the drip tray.
It is necessary to empty regularly the drip tray to avoid any overflowing.
Its is necessary to clean rather quickly the tasks or the deposits being on the glass,
if possible when the plate is still tepid and in every case before using again the ap-
pliance.
Do not use utensils which could damage the plate.
If there is only a small lay of residues, use a dry towel.
If the residues are more important, use a scraper conceived specially for glass ce-
ramic surfaces, with the edges of the blade rounded off and to make sure that the
blade is no touch with the plate on all its length.
Do not use the end of the scraper because it would risk to damage the plate and to
compromise the good functioning and the cleaning.
Change the blade of the scraper when it is not more sharp edge.
After the cleaning, we recommend you to use a specific product for the glass ce-
ramic which forms a protection film on the surface of the plate.
16