Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Connection of the device
- Check that the tension and the frequency of the electricity network suit to the values
indicated on the descriptive plate.
- Make sure that every control knob is positioned on 0.
- Check that neither the cord nor the plug are damaged
- Unwind completely the electric power cable and connect it in a plug connected with
the earth.
- The device is connected.
NB: in case of connection of the device in a plug without earth protection or directly
on the electricity network, confide its connection to a qualified person .
c) Use of device :
Elements of command and display
Command/Display
Thermostat (n°2 on pic-
ture)
Orange pilot light (n°3 on
picture)
On/off switch (n°1 on pic-
ture)
Never use the machine without its drip tray (n°4 on picture)
Never place any object on the cooking surface
Putting on
- Turn on the switch (n°1 on picture).
- Turn on the thermostat control knob (n°2 on picture) on the wished position: the or-
ange pilot light (n°3 on picture) ignites. The machine is warming up. Once orange pi-
lot light (n°3 on picture) is off, the machine reached the wished temperature.
Temperature setting
Set the temperature by positioning the thermostat (n°2 on picture) to the desired
temperature. The orange pilot light (n°3 on picture) switches on if a higher level
of temperature is required and switches off when the same is reached.
This machine does not require preheating. It is not necessary to leave the de-
vice switched on at full power. It is necessary to adapt the temperature to prod-
ucts to be cooked to limit the energy consumption.
If your food sticks on the plate, reduce the temperature of the thermostat.
Function
Temperature setting
Machine is heating (pilot light on)
Temperature reached (pilot light off)
On/off position
15
Publicité
Table des Matières
