Assembly Instructions; How To Use - SKF LAGM 1000E Mode D'emploi

5. Assembly instructions

Replace the lubrication pipe or high-pressure
hose on your grease pump or grease gun with the
grease meter assembly. If wanted the extension
pipe with nozzle can be replaced by the extension
hose (1077601).

6. How to use

To start the grease meter press the start button .
The display lights up:
To reset the grease meter after each dispense press
the button. (The RESET text shows that the left
button has the reset function in this menu).
To illuminate the display during work in dark environments
press the button. The light will automatically switch off
15 seconds after the grease flow has stopped.
The battery symbol indicates how much power is
left in the batteries.
To shut off press button for 2 seconds or wait until
the adjustable time for auto shut off has past.
SKF LAGM 1000E 5