Table Des Matières; General Information; Écrou De Serrage M16; Tuerca De Apriete M16 - Hilti DCH 300 Mode D'emploi

ORIGINAL OPERATING INSTRUCTIONS
DCH 300 diamond cutter
It is essential that the operating instructions
are read before the machine is operated for
the first time.
Always keep these operating instructions to-
gether with the machine.
Ensure that the operating instructions are
with the machine when it is given to other
persons.
Contents
1 General information
2 Description
3 Accessories, consumables
4 Technical data
5 Safety instructions
6 Before use
7 Operation
8 Care and maintenance
9 Troubleshooting
10 Disposal
11 Manufacturer's warranty
1 These numbers refer to the corresponding illustra-
tions. The illustrations can be found on the fold-out cover
pages. Keep these pages open while studying the oper-
ating instructions.
In these operating instructions, the designation "the
power tool" always refers to the DCH 300 diamond cutter.
Operating controls and indicators 1
Spindle lockbutton
@

1 General information

1.1 Safety notices and their meaning
DANGER
Draws attention to imminent danger that will lead to
serious bodily injury or fatality.
WARNING
Draws attention to a potentially dangerous situation that
could lead to serious personal injury or fatality.
Front grip
;
On / off switch
=
Switch-on interlock release button
%
Diamond cutting disc
&
Spindle
(
Guard (hood)
)
Guide wheels
+
Clamping nut wrench, 24 mm AF / 10 mm AF
§
Hex. socket wrench, 6 mm AF
/
Guard (hood) clamping screw
:
Dust removal connector cap
·
Service indicator
$
Theft protection indicator (option)
Page
£
DCH 300 mounting system for diamond cutting
1
2
discs 2
4
5
Reversible flange 60 mm dia.
5
|
Clamping flange, 60 mm dia.
9
¡
Clamping nut, M16 x 1.5
11
Q
12
DCH 300 mounting system for synthetic resin-bonded
13
14 fiber-reinforced abrasive cutting discs (optional) 3
14
Reversible flange 80 mm dia.
W
Synthetic resin-bonded fiber-reinforced cutting
E
discs with a diameter of 300 mm (12")
Clamping flange, 80 mm dia.
R
Clamping nut, M16 x 1.5
T
Hood extension with depth gauge (optional) 4
Hood extension
Z
Hook
U
Stop
I
Cutting depth sliding indicator
O
Cutting depth scale
P
CAUTION
Draws attention to a potentially dangerous situation that
could lead to slight personal injury or damage to the
equipment or other property.
NOTE
Draws attention to an instruction or other useful informa-
tion.
en
1