Storing Machine - Tennant V-WD-9 Manuel D'utilisation

EN
All repairs must be performed by a
qualified service person.
- Wipe machine housing with a cloth and
mild detergent.
- Inspect vacuum hose regularly for holes,
loose cuffs or clogged debris.
- Inspect power cord for damage. Coil cord
neatly after each use.
- Check bag for fullness, and replace it, if it's
necessary.
- Wash main polyester filter by hand with
a mild detergent as needed. Let it dry
thoroughly before replacing. This will
restore your main polyester filter so you
can maintain good suction performance.
After wet vacuuming:
- Drain and rinse tank.
- After each use ensure that float valve is
clean and operating properly

STORING MACHINE

Before storing the machine perform the
following instructions:
1. Empty and rinse
tools.
2. If a bag is present, check if damaged or
full and replace if needed.
3. Store machine in a dry area in the upright
position.
Do not store outdoors and avoid
getting wet. Do not allow machine
to freeze.
10 TENNANT V-WD-9 / V-WD-24
tank and accessory