Detection Zone (For Different Objects) - HYDAC ELECTRONIC HLS 528 Notice D'utilisation

HLS 528 Page 31
8.1

Detection zone (for different objects):

The dark grey areas are determined with a thin round bar (10 or 27 mm dia.) and indicate
the typical operating range of a sensor. In order to obtain the light grey areas, a plate (500
x 500 mm) is introduced into the beam spread from the side. In doing so, the optimum
angle between plate and sensor is always employed. This therefore indicates the
maximum detection zone of the sensor. It is not possible to evaluate ultrasonic reflections
outside this area.
Operating range 250 mm:
Status 12.06.2014 HYDAC ELECTRONIC GMBH Part No. 669826 E