SAFETY RECOMMENDATIONS
MAGNETIC FIELD
CAUTION! Do not locate sensitive high gain equipment such as preamplifiers or tape decks directly
above or below the unit. This unit has a strong magnetic field which can induce hum into unshielded
devices that are located nearby. The field has strongest spots just above and below the unit. Locate
the amplifier at the bottom of the rack and the preamplifier or other sensitive equipment at the top.
•
To prevent electric shock, do not remove top or bottom covers.
•
No user serviceable parts inside.
•
Refer servicing to qualified servicing personnel.
•
Disconnect power cord before removing back panel cover to access gain switch.
•
No naked flame sources, such as lighted candles, should be placed on the apparatus
•
The unit should only be used in moderate climates
•
This unit should be cleaned only with a dry cloth. Avoid solvents or other cleaning detergents
•
A minimum distance of 0.5m around the unit must be kept to ensure sufficient ventilation and avoid
overheating
•
No naked flame sources, such as lighted candles, should be placed on the apparatus
•
The ventilation holes should not be impeded by covering the ventilation openings with items, such
as newspapers, table cloths, curtains, etc.
•
Do not expose the unit to dripping or splashing water.
•
Do not put objects filled with liquids such as vases, on the apparatus.
•
The amplifier is part of the CLASS I electrical appliances. It must be connected to a MAINS outlet
with a protective earth connection.
•
Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect
device shall remain readily operable
•
Where an all-pole MAINS SWITCH is used as the disconnect device, the location on the
apparatus and the function of the switch shall be described and the switch shall remain readily
operable.
WARNING! To reduce the risk of electric shock, do not expose this equipment to rain or moisture!
The exclamation point triangle is used to alert the user to important operating or maintenance
instructions
The lightning bolt triangle is used to alert the user to the risk of electric shock
Front panel
1.USB STICK SOCKET
USB stick input
2. Gain control
Input gain control allowing to attenuate the input signal that is sent to the various channels of the
amplifier.
The dB control range is as follows: Fully closed (the signal is at zero and not sent to the channels of
the amplifier) or fully open (i.e. at rated power: the signal is not attenuated at all and sent at the input
power into the amplifier channels)
3. USB CONTROLS
USB player transport controls
a: |<< : Use this button to re-start the track or to select the previous track.
b: Play/Pause: Each time you press this button, the operation changes from play to pause or from
©Copyright LOTRONIC2014
GB
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Page 3