Features & Controls; Touch Controls - Zephyr Tornado II AK8200BS Guide D'utilisation, D'entretien Et D'installation

ZEPHYRONLINE.COM

Touch Controls

1. Blower On/Off
By pressing the blower is switched on and off. When switched on, the blower starts up on speed level 1.
2. Speed Selection
- Press to decrease fan speed. 3, 2, 1.
- If fan is on Speed 1 and
- Press to increase fan speed. Fan On, 1, 2, 3.
- If hood is off and
3. Delay Off
This feature is used for programmed shut down of blower 5 minutes after the function is activated. Press
once, a dot flashes
completely shut down after 5 minutes.
4. Lights Low/Medium/High/Off
Switch lights on to low by pressing
and again to shut off lights.
5. Display Window
The display window indicates speed levels and features such as baffle filter clean reminder, delay off and
clean air indicator.
Tornado II & Tornado III Use, Care, and Installation Guide
1 Blower On/Off
Display (speed level, delay off, filter clean)
5
2 Adjust 3 Speed Levels
is pressed, the fan will power off.
is pressed, the fan will turn on speed 1.
in the lower right side of display
once, press a second time for medium, press a third time for high
Features & Controls
4 Lights Low/Medium/High/Off
3 5 Min Delay Off
indicating the function is on. The blower will
17