Installation Procedure; Care & Cleaning - Toto Aquia TB416DD Manuel D'installation Et D'utilisation

INSTALLATION PROCEDURE

1) Verify that the TB6TR valve set has been installed according to the instructions and
leak tested before installing the bath faucet. Remove the three plaster guards from
the TB6TR valve set.
2) Remove the plug from the spout
shank of the TB6TR valve set
protruding from the finished
deck.
3) Loosen the set screw on the
back of the spout, and pull the
adapter out of the spout.
Tighten the adapter onto the
spout shank protruding from the
finished deck. Push the spout
onto the adapter, align with tub,
and secure by tightening the set
screw.
4) Tighten a valve stem to each
of the TB6TR valves protruding
from the finished deck using the
included screw and washer.
Using a pair of pliers, rotate the
cold (right) valve stem counter-
clockwise until it stops. Rotate
the hot (left) valve stem clock-
wise until it stops.
Plug
Spout
Shank
Spout
Adapter
Spout
Shank
Screw &
Washer
Valve
Stem
Valve
4
Installation Procedure (continued)
5) Upton Models:
Place a trim plate over each valve,
and secure by tightening the trim
collar.
Install the handles onto the valve
stems with the set screw holes to-
wards the back, and secure with the
set screws.
Set
Screw
Aquia Models:
Tighten a trim plate onto each valve
until it contacts the finished deck.
Install the cold (right) handle onto
the cold valve stem with the lever
pointing to the right, and secure
with set screw. Install the hot (left)
handle onto the hot valve stem with
the lever pointing to the left, and
secure with the set screw.
Your new faucet is designed for years of trouble-free performance. Keep it
looking new by cleaning it periodically with mild soap, rinsing thoroughly with
warm water and drying with a clean, soft cloth. Do not use abrasive cleaners,
steel wool or harsh chemicals, as these will dull the finish. Failure to follow
these instructions may void your warranty.
TB630DD
Handle
Trim
Collar
Trim
Plate
TB416DD
Handle
Escutcheon
CARE & CLEANING
5
Set
Screw
Set
Screw