Before Using - Domo DO7047S Mode D'emploi

DO7047S
parts
1. Soleplate
2. Side
3. Side cover
4. Water reservoir
5. Spray opening
6. Water filling opening
7. Steam control button
8. Steam shot button

BEFORE USING

Check whether or not the mains voltage specified on the appliance's rating plate
corresponds with the mains power supply.
Fully unroll the electric lead before use.
Place the appliance on a sturdy, even surface or ironing board.
Never immerse the appliance in water or any other liquid.
The iron must always be set to 'MIN' before you place or remove the plug from the
socket.
Wait until the iron has cooled off completely before putting it away.
Never pull on the mains lead, always gold the plug itself.
To prevent overloading the fuse, never plug another appliance with an equal mains
voltage into the same electrical fuse group.
USING THE IRON THE FIRST TIME
Remove the plastic protecting the soleplate (if it is present) and clean the soleplate
with a soft non-abrasive cloth.
Some parts of the iron have been lightly greased, that will cause the iron to emit a
9. Spray button
10. Lead protection
11. Power supply lead
12. Back
13. Housing
14. Temperature indicator light
15. Temperature dial
16. Self-cleansing button
24
www.domo-elektro.be