Cleaning And Maintenance - Royal Catering RCCD-1/1-65-KS-E Manuel D'utilisation

PRINCIPLE OF OPERATION
Assembly
The device is composed of:
1. main on / off switch
2. control light
3. thermostat
4. GN container for dishes
BEFORE FIRST USE
Checking packaging upon consignment
Upon receipt of the goods, check the packaging for integrity and open it. If the packaging is damaged, please
contact your transport company and distributor within 3 days, and document the damages as detailed as
possible. Do not turn the package upside down! When transporting the package, please ensure that it is kept
horizontal and stable. Please keep all packaging materials (cardboard, plastic tapes and styrofoam), so that in
case of a problem, the device can be sent back to the service centre in accurate condition.
Disposing of packaging
The various items used for packaging (cardboard, plastic straps, polyurethane foam) should be conserved, so
that the device can be sent back to the service centre in best conditions in case of problem.
DEVICE INSTALLING
Appliance location
The work surface where the device will be located must be suitable for the size of the appliance, please refer
to the measurements. The work surface must be levelled and dry and at a fitting height from the ground to
enable a proper use of the device.
The environmental humidity shouldn't be over 85%. The power cord connected with the appliance must be
reliable grounding and correspond to the technical details.
OPERATION
• Add water to the outer container before placing the inner container into the warmer. Never over-fill
with water. Under no circumstances should the inner container float, even when empty. Remove any
excess water immediately. Water level should be between "min" and "max" marked on the container.
• Put the plug into the power socket.
• Set the thermostat to "0" and turn on the device using main switch.
• Thermostat can be set within 0 and 5: 0 – thermostat is off; 5 – heating set to the max.
• Regulate the thermostat on the chosen value.
• The control light turns on, the device starts to heat and the temperature raises gradually.
• As soon as the set temperature is reached, the control light turns off and the device stops to heat.
• As soon as the temperature decreases, the thermostat reacts to it: the control light turns on again and
the device restarts to heat.
• After use, reset the thermostat on zero.
• Generally speaking, it is advisable to unplug the device while not used.
• When the device cooled down, clean it. This should be done after each use to keep the device in perfect
hygienic condition. To clean the rest of the device, watch up to protect the electric parts from humidity
and from direct water contact to avoid electric shocks and short-circuits. An impregnated cloth is easily
enough if you regularly clean the device.
• If you don´t use the device for a longer time or stock it, check the humidity and temperature conditions:
The air has to be dry and the device should be covered to be protected from dust deposits.
8
TRANSPORTATION AND STORAGE
Shaking, crashing and turning upside down of the device should be prevented when transported. Store it in a
properly ventilated surrounding with dry air and without any corrosive gas.

CLEANING AND MAINTENANCE

• Disconnect from electricity when cleaning equipment.
• Use cleaner without corrosive substances to clean surface.
• Dry all parts well after cleaning, before the device is used again.
• Store the unit in a dry, cool location, free from moisture and direct exposure to sunlight.
REGULAR CONTROL OF THE DEVICE
Control regularly that the device doesn´t present any damage. If there is any damage, please stop using the
device. Please contact your customer service to solve the problem.
What to do in case of problem?
Please contact your customer service and join following information:
• Invoice number and serial number (the latest is to be found on the technical plate on the device).
• If relevant, a picture of the damaged, broken or defective part.
• It will be easier for your customer service clerk to determinate the source of the problem if you make
a detailed and precise description of the matter. Avoid formulations like "the device doesn't heat",
which may mean that it doesn't heat enough or even not at all. Though, those two possibilities have a
different causation!
• Still indicate the performance of the lights to facilitate the diagnosis: Is the light of the ON/OFF switch
on when the rocker switch is in ON position? Does the control light turn on when the device is
working?
The more detailed your information, the quicker the customer service will be able to answer your problem
rapidly and efficiently!
9