Aventics ECD-IV Notice D'instruction page 30

Symbol Function
Vacuum unit
Vacuum value in mbar
Vacuum value in kPa
Vacuum value in inHg
Switch-off delay
Rotation display
Standard display
Display rotated
ECO mode
ECO mode on
No ECO mode
PIN code
Menu locked
Menu unlocked
Reset
The production setup profiles P-1 to P-3 have the same data set as the standard data set P-0 as their factory settings.
8/2
Display Symbols, Part 2
Comment
Vacuum unit in which the measured value and settings values are displayed
The vacuum values are displayed in the unit mbar.
The vacuum values are displayed in the unit kPa.
The vacuum values are displayed in the unit inchHg.
Setting for the switch-off delay for OUT2
Setting for the display (rotation)
Display not rotated
Display rotated by 180°
Setting for ECO mode
ECO mode activated – Display switches off
ECO mode deactivated – Display permanently on
Enter the PIN code to release the lock
The parameters are locked against modification.
The buttons and menus are unlocked.
All adjustable values are reset to the factory settings.