To connect the EC150 to a computer, you need a MIDI interface for the computer,
sequencing or musical notation software, and two standard MIDI cables. Connect
the EC150 MIDI OUT connector to the MIDI IN connector of the computer. Con-
nect the EC150 MIDI IN connector to the MIDI OUT connector of the computer.
For example:
Standard MIDI settings
When turning the instrument on, the MIDI parameters of the EC150 are pro-
grammed as follows:
Parameter
Transmission channel
Reception channel(s)
Local
Omni
Selecting the transmission channel
The standard MIDI has 16 separate channels available for transmission and recep-
tion of data. EC150 always receives on all 16 channels, and transmits on a single
channel. To transmit data from the EC150, you need to choose which of the 16
channels you wish to transmit data on.
30
MIDI IN
MIDI OUT
MIDI OUT
MIDI IN
EC150 rear panel
Setting
1
All 16 (1-16)
ON
ON
Chapter 6