Selecting a bell for the accent.
sound.
While the metronome is playing, hold down the METRONOME button, then press
1
the VIBES/GUITAR sound selection button. The LED on the button will light, and a
bell sound will be heard on the first beat of the bar.
To return to the normal accent, hold down the METRONOME button and press the
2
HARPSI/CLAV sound selection button to switch on the LED on the HARPSI/
CLAV button.
Note: When the instrument is turned on, the bell is automatically disabled.
22
The accented beat can be changed to a bell
Chapter 3