Korg EC150 Mode D'emploi page 38

On the EC150, hold down the TRANSPOSE/FUNCTION button and press the
2
VIBES/GUITAR sound selection button. The LEDs of the TRANSPOSE/FUNC-
TION and VIBES/GUITAR buttons will blink, and the EC150 will wait to receive
the data dump.
Set the data filer to send the sound setting data that were previously saved from the
3
EC150. Please read the data filer owner's manual for details on data transmission.
The EC150 will receive the data.
When the data dump is finished, the EC150 will return to the same status it was
before the data dump.
During a data dump operation, the EC150 will not produce sound, and no other
function will work.
You may cancel a data dump operation before the data dump begins, by pressing the
TRANSPOSE/FUNCTION or VIBES/GUITAR button.
36
Chapter 6