Intended Use; Delivery Content - BASETech 1833947 Notice D'emploi

3. Intended use

This code lock is a digitally controlled entry control (RFID technology) for doors and is thus
perfectly suited to use in both home or office. The complete programming and code entry is
carried out using the touch keypad on the code lock.
The code lock has 2 relay outputs (Output 1 und Output 2). OUTPUT 1 can either be activated
by 500 ID cards, 500 user codes or via 500 ID cards + user numbers.
OUTPUT 2 on the other hand can only be activated via 500 user codes.
The system offers the additional following functions and connection options:
• Magnetic card recognition using RFID technology
• Electric door openers (12 V/DC) can be attached and controlled by the system
• A magnet contact can be attached (for safety function and door state monitoring), be sure to
note the connection diagram examples at the end of these operating instructions.
• Compatible with additional alarm systems
• Acoustic or silent operation
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in bathrooms,
must be avoided under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use
the product for purposes other than those described above, the product may be damaged.
In addition, improper use can cause hazards such as short circuiting, fire, electric shock etc.
Read the instructions carefully and keep them. Make this product available to third parties only
together with its operating instructions.
All company names and product names are trademarks of their respective owners. All rights
reserved.

4. Delivery content

• Code lock with card reader
• Operating instructions
Latest operating instructions
Download the latest operating instructions via the link www.conrad.com/downloads or scan the
QR code shown. Follow the instructions on the website.
34