Read Out The Fertility Profile - uebe cyclotest baby Mode D'emploi

Operating the unit
If .NET Framework has already been installed on your PC, the cyclotest®
baby software will be installed straight away.
Your PC is now ready to read out the fertility profile.
Read out the fertility profile
1. You can only read out the fertility profile once the installation has
been fully completed.
2. Important! Connect the supplied USB cable first to the PC and only
then to the unit.
Attention: When pressing the large round test key do not wait longer
than 1 second until pressing the cycle start key as otherwise you might
start a new cycle! In case you started a new cycle accidentally, please
call the cyclotest® service hotline.
3. Press the large round test key on your device briefly and then im-
mediately press the small round cycle start key until USB appears
on the display. Your cyclotest® monitor is now ready to transmit
data to the PC!
Confirm here with "Install".
EN-68