uebe cyclotest baby Mode D'emploi page 62

Operating the unit
Recall of cycle summaries for previous cycles (unit is switched off
or on the current cycle day):
Briefly press the right Arrow button twice. The following appears:
This is how you read the overview:
• The digits on the left and right refer to the flashing cycle.
• Left digit: day of CY input if corresponding information was input
• Right digit: day of temperature high if a temperature high was de-
tected
Press and hold down the large Measurement button: the temperature
high is replaced by a display of the cycle length.
Press the left or right Arrow button. The flashing bar in the bar chart
moves and shows you which cycle you are in at the moment (right:
current cycle, left = oldest stored cycle). 12 cycles can be stored.
Fig. no. 23
First bar from the right shows the current
cycle
Fig. no. 24
EN-62