Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
G
B
E I
Functional description
The verticuttor and lawn aerator has two
easily exchangeable work cylinders:
An aerator cylinder made of hard plastic
with vertically rotating sprung tines, and a
verticutor cylinder with vertically mounted
high-grade steel knives.
The implement features a high-quality
plastic case with collection bag and a handle
bar with a folding function. Please refer to
the subsequent descriptions for the actual
functions of the individual control elements.
Technical data
Motor input ............................... 1200 W
Rated voltage ............230-240 V~, 50 Hz
Protection Class ...............................
Degree of protection ........................ IPX4
Rotating speed of the tool
(n
) ........................... 3600 min
o
Cylinder width ...............................31 cm
Readjustment range for wear ............9 mm
Volume collection bag ....................... 30 l
Weight ....................................... 1 0 .6 kg
Acoustic pressure level
(L
) .................. 84 dB (A); K
pA
Sound power level (L
Measured ........99 dB (A); K
Guaranteed ....................... 103 dB (A)
Vibration (a
) ............... 4 m/s
n
The noise and vibration values were
established by the standards and stipulations
listed in the Conformity Declaration.
Technical and visual changes can be
completed in the course of further develop-
dimensions, references and details in these
Operating Instructions are without
guarantee. Consequently legal claims based
on these Operating Instructions cannot be
asserted.
6
(r.p.m)
-1
= 3 dB(A)
pA
)
wA
= 4 dB (A)
wA
; K= 2 m/s
2
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to
compare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
Safety precautions aimed at
protecting the user should be based
on estimated exposure under actual
usage conditions (all parts of the
operating cycle are to be considered,
II
including, for example, times during
which the power tool is turned off
and times when the tool is turned on
but is running idle).
Safety precautions
This section covers the basic
2
safety instructions when
working with this implement.
Publicité
Chapitres
Table des Matières
