Mechanism
The solar animal repellent registers the body heat of animals that
move in the detection range of the motion sensor. As soon as an
animal is registered, the device produces a very high pitched tone,
which is uncomfortable for animals. As different animals can have
different hearing ranges, the frequency of the signal can be ad-
justed. Nocturnal animals can also trigger an automatic flashing light.
To be able to repel lots of different animals, you can adjust the
settings to combine any of the signal frequencies with the flashing
light.
WARNING: Frequencies from 16 Hz to a maximum of 20kHz
can generally be heard by humans. However, with increasing age,
humans' ability to hear higher frequencies is reduced. You should
work on the assumption the programmes 1, 2 and 5 release
frequencies, which can be heard by humans.
Thus you should set up the device so that it is out of the hearing
range of humans.
Description of parts
Speaker
1
Sensitivity controller
2
Frequency controller
3
Flashing light
4
Motion sensor
5
24 GB/IE
Charge indicator
6
Loop
7
Battery cover
8
Seal
9
Solar cell
10