Cleaning; Grease Filters - Pelgrim MSL625ERVS Notice D'utilisation

MAINTENANCE

Cleaning

Grease filters

EN 6
Enamelled extractor hoods
Clean the extractor hood with soap and a soft cloth. Then rinse with
clean water. Do not use aggressive cleaning agents, such as soda. The
enamel will remain attractive if you polish it with wax from time to time.
Stainless steel extractor hoods
For cleaning the stainless steel parts you can best use a mild cleaning
agent (washing-up liquid) and a damp cloth. Dry with kitchen paper or
a dry cloth.
The stainless steel regains its shine if you occasionally use a stainless-
steel care product or polish. The polish applies a dirt-resistant layer to
the stainless steel. Always clean the stainless steel in the direction of
polishing.
Pelgrim supplies cleaning and maintenance agents for extractor
hoods. For information on availability, please contact the consumer
department (see warranty conditions for the phone numbers).
Never use abrasive cleaning agents (such as green scourers or other
scouring pads) or polishing cleaning agents (such as liquid abrasives).
Never use caustic agents. These can attack the stainless steel.
Clean the grease filters at least once a month. During cleaning, the
aluminium parts of the filters may become dull as a result of the
cleaning agents used, particularly when placed in the dishwasher.
This is normal and is not covered by the warranty.