Cleaning The Filters - Pelgrim DSGA990 Serie Notice D'utilisation

Masquer les pouces Voir aussi pour DSGA990 Serie:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

OPERATION
Cleaning filters
Switching the lighting on and off
1. Briefly touch the lighting key.
The lighting is switched on at maximum brightness.
2. Touch the lighting key for two seconds to dim the lighting.
3. To switch the dimmed lighting off, touch the lighting key for about
three seconds.
4. If you want to switch off the lighting, briefly touch the lighting key.
Grease filter cleaning indicator
After 100 hours of use of the cooker hood, a beep sounds periodically
during operation. The on/off key flashes continuously when the cooker
hood is switched off. The grease filter must be cleaned.
• To reset the cleaning indicator, touch the on/off key twice with the
cooker hood switched off.
You will hear a confirmation beep for 3 seconds.
After 20 hours, the filter cleaning indicator automatically resets.
Carbon filter cleaning indicator
After 200 hours of use of the cooker hood, a beep sounds periodically
during use if the carbon filter contamination indicator is activated. The
lighting key flashes continuously when the cooker hood is switched off.
The carbon filter must be cleaned or replaced.
• To reset the cleaning indicator, touch the lighting key twice with the
cooker hood switched off.
You will hear a confirmation beep for 3 seconds.
After 20 hours, the filter cleaning indicator automatically resets.
EN 7

Publicité

Table des Matières
loading

Table des Matières