Setting Up; Connecting The Telephone - Geemarc CL100 Notice D'utilisation

Line cord
PTT Plug (*)
3
(*) Classified TNV-3 according
to EN60950 standard.
index card
Battery
compartment (*)
1 - CONNECTING TELEPHONE
1 - Connect the handset cord.
2 - Open the battery compartment by unscrewing
the retaining screw and pulling back the latch.
3 - Insert correctly 4 x AAA 1.5V alkaline battery
(not supplied) in the battery compartment (*). Bat-
teries are required if you wish to increase the ring
level of 10 dB.
4 - Snap the battery door back in place and re-
place the retaining screw.
5 - Connect the line cord.

SETTING UP

Handset cord
6
Wall mounting
screw holes
2
Tone/Pulse
switch
Time break
recall switch
(E=100ms)
1