Using The Phone; Answering Incoming Call; Adjustment - Geemarc CL100 Notice D'utilisation

USING THE PHONE

The screws should protrude from wall by 6-7 mm.
Place the phone onto the screw-heads and slide
down to secure.
If you are using this telephone with a
hearing aid, set your hearing aid to
the "T" setting.

1 - ANSWERING INCOMING CALL

- When an incoming call is received the phone will
ring and flash,to answer the call lift the handset
and speak.
- On completion of the call, carefully replace the
handset in the cradle to release the line.
2-VOLUME AND TONE RECEIVING

ADJUSTMENT

You can increase the volume and adjust the
receiving tone according to your own hearing
requirements.
9