REICH MoveControl Compact Instructions D'assemblage Et Mode D'emploi page 35

Anhang A6 Garantiebestimmungen
1. Warranty Case
The manufacturer
malfunctions in the appliance, which are based on
material or production faults. In addition to this,
the statutory warranty claims against the seller
remain valid.
A claim under warranty shall not pertain:
- for wearing parts and in cases of natural wear
and tear
- as a result of non original Reich parts being
used in the appliances
- as a consequence of failure to respect the
manufacturer's instructions for installation and use
- as a consequence of improper handling
- as a consequence of improper transport
packing.
2. Scope of Warranty
If a move control, which has been purchased from
January 2006, has been registered to be returned
within 4 weeks from the purchase date with
enclosed warranty
completely filled in, Reich GmbH grants a
warranty of 36 months from the purchase date. In
case of assertion of a warranty claim, the original
sales voucher is to be submitted.
The warranty is valid for defects according to sub-
paragraph 1, which are occurring within 36
months as from conclusion of the purchase
contract between the seller and the end-
consumer. The manufacturer will remove such
deficiency by subsequent fulfilment, i. e. at his
discretion, either by repair or compensation
delivery. If the manufacturer provides service
under warranty, the term of warranty shall not
recommence anew with regard to the repaired or
replaced parts, rather the old warranty period
shall continue to run. More extensive claims, in
particular claims for compensatory damages by
purchasers or third parties are excluded. This
does not affect the rules of the product liability
law.
The manufacturer
employing the REICH customer service for the
removal of a malfunction under warranty, in
particular transportation
expenses, job and material costs, as long as the
service is carried out in Germany.
Additional cost based on complicated removal
and installation conditions of the appliance (e. g.
removal of furniture or parts of the vehicle body)
grants a warranty
registration card
shall bear the cost
costs, travelling
do not come under warranty.
for The warranty for manufacturing defects of driving
rollers is 36 months.
Removal of sharp-edged stones from the tyres is
absolutely required prior to use of the move
control.
3. Assertion of the warranty case
Generally advise the REICH service department
in case of failure:
REICH GmbH, Ahornweg 37
35713 Eschenburg, Germany
Phone +49 (0) 2774-9305-0
Email: info@reich-web.com
For any other country, he corresponding service
partners are at disposal.
Complaints are to be described in detail.
Furthermore, the serial number of the appliance
as well as the purchase date shall be advised.
The end consumer shall bring or send the
being appliance to the manufacturer on his own risk, to
enable the manufacturer to check, if it is a
warranty case.
In case of return to the factory, the mode of
transport shall be by freight. In case of warranty,
the factory bears the transport costs or the cost
for delivery and return. If the damage is deemed
not to be a warranty case, the manufacturer shall
notify the customer and shall specify the repair
cost, which
manufacturer; in this case, the customer shall
also bear the shipping costs.
4. Disclaimer
Reich GmbH does not assume any liability,
neither directly nor indirectly, for damages, which
have been caused by the operation of the move
control.
The warranty will be void in case of improper
application, installation or repair, as well as for
damages resulting from normal wear.
Attention:
of Type and serial number can be drawn from the
nameplate of your move control.
shall not be borne by the
GB13