Safety Notes - Toolson WS7200PRO Traduction Des Instructions D'origine

Manufacturer:
scheppach Fabrikation von Holzbearbeitungs-
maschinen GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear client,
We hope you enjoy your new firewood circular saw
and wish you success with it.
INFORMATION:
The manufacturer of this tool is, according to the
current product liability law, not liable for damages
caused to or by this tool because of:
• incorrect usage,
• failure to observe the manual,
• repairs by third parties, not authorized specialists,
• fitting and exchange of non-original exchange
parts,
• non-intended use,
• falling out of the electrical installations because of
inobservance of the electrical Rules and VDE-Reg-
ulations 0100, DIN 57113 / VDE0113.
We recommend that you:
Read the entire operating instructions before
assembling and implementing.
This instruction manual should make it easier for you
to get to know your machine and to use its range of
applications as intended. The manual contains impor-
tant information on how to work with the machine in
a secure, correct and efficient way, and how you can
avoid risks, save repair costs, reduce down time and
increase the reliability and life span of the machine.
Apart from the safety rules mentioned in these oper-
ating instructions, you should implicitly pay attention
to the valid regulations of your country for the use
of the machine. Keep the manual, in a plastic cover
protected against dirt and humidity, with the machine.
They should be read and observed carefully by every
member of staff before starting to work. Only people
instructed on how to use the machine and informed
about the possible risks, should be allowed to use
it. The required minimum age is to be adhered to.
Besides the safety instructions in this manual and the
special regulations of your country the recognized
technical rules for the operation of wood processing
machines need to be observed.
12 GB
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58
General instructions
• After unpacking please check all parts for possible
damage during transport. In case of complaints the
driver needs to be contacted as soon as possible.
• Complaints coming in later will not be recognized
as such.
• Check if the consignment is complete.
• Familiarize yourself with the machine by means of
the operating instructions before implementing it.
• In case of replacing worn or exchange parts, as
for accessories, only use original Fuxtec parts.
You can obtain exchange parts at the specialized
dealer.
• Upon ordering, please specify our article nº´s as
well as type and year of construction of the tool.
Safety instructions m
• In these operation instructions we have indicated
positions that concern your safety, with this mark: m

Safety notes

• Take due note of all this information before and
while working with the saw.
• Do not lose these safety regulations.
• When equipment is not being used it should be
kept in a dry, closed place out of childrens reach.
• Keep mounted attachments sharp and clean to
enable you to work well and safely.
• Warning! The use of other tools and accessories
may put you at risk of injury.
• Give these safety regulations to all persons who
work on the machine.
• Caution! Hands and fingers may be injured on
the rotating saw blade.
• Warning: Always unplug the power plug or re-
move the spark plug connector prior to starting
any of the maintenance work described in this
manual.
• Do not leave the saw in the rain and never use it
in damp or wet conditions.
• Provide good lighting.
• Do not saw near flammable liquids or gases.
• Wear suitable work clothes! Loose garments or
jewelry may become caught up in the rotating
saw blade.
• Non-slip shoes are recommended when working
outdoors.
• Wear a hair net if you have long hair.
• Avoid abnormal working postures.
• Operators must be at least 16 years of age.
• Keep children away from the machine when the
motor is running.
• Keep your workplace clean of wood scrap and
any unnecessary objects.
• An untidy work area invites accidents.
• Do not allow other persons, especially children,
to touch the tool. Keep them out of your work
area.