Determining The Edit Points - In/Out Points - Sony RM-450A Mode D'emploi

Automatic Editing
Determining the Edit Points — IN/OUT Points
Using the search dial
SERVO IN OUT
RESET
HOURS MINUTES SECONDS FRAMES EDITING CONTROL UNIT RM-450A
POWER PLAYER
ON
STDBY EJECT ASMBL V A1
OFF
EDIT MODE
– +
PLAY STILL REW FF
AUDIO SPLIT TRIM
REVERSE FORWARD
IN OUT GO TO IN
PLAYER RECORDER
ENTRY
SHUTTLE JOG
AUTO EDIT RVW
PREVIEW
/END /JUMP
Using the PLAY/REW/FF buttons
16
IN OUT SERVO
RESET TOTAL
HOURS MINUTES SECONDS FRAMES
RECORDER
A2 REC EDIT STDBY EJECT
PLAY STILL REW FF
LAST EDIT
REVERSE FORWARD
OUT
SHUTTLE JOG
ALL STOP
The search dial is convenient to use to search for the desired tape point.
The search dial can playback the tape in the reverse and forward directions
at various speeds. Therefore, you can find the scene for the desired edit
point easily. The search dial operates in the shuttle or jog mode, and you
can change the mode by simply pushing in the dial. The shuttle mode has
three click positions, and the jog mode has no click position.
Shuttle mode
This mode is useful to search for an approximate edit point. The playback
tape speed depends on the position of the dial. The tape runs within
10 times the normal speed.
Jog mode
This mode is useful to precisely find the frame of a desired edit point. The
playback speed depends on the speed at which you rotate the dial. The
tape runs within
You can search for the desired tape point by pressing the PLAY/REW/FF
buttons.
Press the STILL button to stop the tape when you find the desired scene on
the monitor.
REVERSE
For reverse search
SHUTTLE
1
/ to 3 times the normal speed.
30
FORWARD
For forward search
JOG
1
/ to
30