Preparation For Editing - Sony RM-450A Mode D'emploi

Preparation for Editing

Video
monitor
TRACKING REMOTE/LOCAL
control selector: REMOTE
REMOTE-1/REMOTE-2
selector: REMOTE-1
When the VTR having an internal time code generator,
such as BVW-40/40P, is connected, set the switches as
follows:
EXT/INT: INT
SLAVE LOCK/PRESET: PRESET
FREE RUN/REC RUN: FREE RUN
12
Video monitor
Turn the power on. Set the
INPUT SELECT switch so
that the picture from the VTR
can be monitored.
AUDIO LEVEL controls
Before editing, set the player
in the playback mode and
adjust the audio recording
level of the recorder.
VIDEO LEVEL control
Before editing, set the player
in the playback mode and
adjust the video recording
level of the recorder.
TRACKING control
Set the
POWER
Before editing adjust this
switch ON.
control by playing back the
recorded tape.
Player
BVU-950/950P
SKEW control
Before editing, adjust this
control by playing back the
recorded tape.
RM-450A
When the VTR having a function to read a VITC is
connected, set the switch as it can read both a VITC
and a LTC. (If the VTR has a VITC/AUTO selector,
set the selector to AUTO.)
REMOTE/LOCAL
selector: REMOTE
Recorder
BVU-950/950P
REMOTE-1/REMOTE-2
selector: REMOTE-1
Set the SYSTEM PRESET
DIP switches on this panel.
(See page 9.)
Video
monitor
Set the
POWER
switch ON.
Inside panel