Transport And Storage; Description Of The Safety Valve - HEROSE 0681X Notice D'utilisation

3

Transport and storage

3.1 Inspection of condition on delivery
 Inspect the safety valve for damage upon receipt.
In case of transport damage, determine and document the precise extent of the damage, and
report it immediately to the supplying dealer/carrier and the insurer.
3.2 Transportation

Transport the safety valve in the packaging supplied.
The safety valve is delivered in a ready-to-operate state with the connections protected by caps.

Protect the safety valve against shocks, hammering, vibrations and dirt.
 Adhere to a transport temperature range of -20 °C to +65 °C.
3.3 Storage
 Store the safety valve in a clean and dry place.
 Make use of a desiccant or heating in damp storerooms to prevent the formation of
condensation.
 Adhere to a storage temperature range of -20 °C to +65 °C.
4

Description of the safety valve

Refer to the respective catalogue page for further detailed information.
4.1 Structure
Design
Directly acting angle type safety valve, spring-loaded.
4.2 Valve marking
The safety valve is equipped with a marking for identification.
Explanation
Type
TAG-no.
S/N:
Date
TÜV SV
S/G
L
p
0
d
0
A
0
cap
Lift
Temp
p
set
O
2
0045
16
Operating instructions
06810/ 06815/ 06820/ 06850/ 06855
Specified by the customer
Serial number
MM.YY, month and year of manufacture
Component identification number
Coefficient of discharge for vapours (S) and
gases (G)
Coefficient of discharge for liquids (L)
Opening pressure
Narrowest flow diameter in mm
Narrowest flow area in mm²
Capacity of the valve
Valve lift
Temperature range min/max
Test pressure
Valving marking suitability for use with oxygen
CE-mark, ID of notified body
Phone +49 4531 509-0