General Safety Instructions; Workplace Safety; Electric Safety - Nakayama ES7100 Traduction De La Notice Originale

Wear protective gloves.
Wear safety shoes.
Wear tightly fitting clothes when
working with the power tool.
Do not work with the pole-mounted
trimming chainsaw next to cables,
power supply lines or telephone lines.
Keep a safe distance of 10 m from
live wires above the ground when
working with the power tool.
Protection class II
Confirmation that the power tool is
in compliance with the regulations of
the European Community.
Collect power tools taken out of
service and other electro-technical
and electrical products separately and
recycle them appropriately.
symbol for no-load speed
min
symbol for cutting length

4. GENERAL SAFETY INSTRUCTIONS

WARNING
Read all safety notes and instructions. Non-
observance of safety notes and instructions
may result in electric shock, fire and/or severe
injury.
Store all safety notes and instructions for
future reference.
The term "power tools" used in the safety notes
refers to power tools connected to the mains
(with a power cable) or operated with a battery
(without a power cable).
This tool is not intended to be used by persons
(including children) with limited physical,
sensorial or mental skills or who lack experience
and/or knowledge, unless they are supervised by
a person responsible for their safety or advised
by this person on how to use the device. Children
must be supervised in order to make sure that
they do not play with the power tool.

4.1 Workplace safety

a) Keep your workplace clean and well-
illuminated. Disorderliness and poorly-
illuminated workplaces may lead to accidents.
b) Do not operate the power tool in explosive
atmospheres with inflammable liquids, gases
or dust. Power tools generate sparks which may
ignite dust or vapours.
c) Keep children and other persons away from
the power tool during operation. You may lose
control of the device if distracted.

4.2 Electric safety

a) The plug of the power tool must fit into the
socket. Do not modify the plug in any way. Do
not use adapter plugs together with grounded
power tools. Unmodified plugs and matching
GB
45