Important - EINHELL LE-SMP 750-S Mode D'emploi

Anleitung LE-SMP 750-S SPK 7
Before start-up, note the Consistency
Your submersible pump is desig-
following!
nated for the circulation of water
 The pump can be connected to
with a maximum temperature of
any shock-proof plug which has
35° C.
been installed according to
This pump may not be used for
regulations. The plug must have
other fluids, especially motor fuels,
a supply voltage of 230 V ~ 50
cleaning fluids, and other chemical
Hz. Fuse min. 6 Amp.
products!
Caution!
Installation
The submersible motor pumps is
When the pump is to be used
installed as follows:
near swimming pools or garden
 In a stationary position with
ponds and in their area of pro-
fixed pipeline
tection, it must be equipped with
or
a ground-fault circuit interruptor
 in a stationary position with a
with a nominal trip current of
flexible hose pipe.
max. 30 mA (according to VDE
0100, part 702 and 738).
Please note!
The pump must not be operated
while people are in the swim-
You should never install the pump
ming pool or in the garden pond!
by suspending it unsupported from
Please contact your electrician!
its delivery pipe or power cable.
The submersible motor pump must
be suspended from the specially
Attention!
provided handle or be placed on
the bottom of the shaft. To guaran-
(Important for your own security)
tee that the pump works properly,
Before starting to run your new
the bottom of the shaft must be
submersible pump, please have
kept free of sludge and dirt of all
the following items checked by an
kinds.
expert:
 Ground connection
If the level of water sinks too far,
 Zero conductor any sludge in the shaft will dry out
 Fault current breaker switch
quickly and stop the pump from
starting up. It is necessary, there-
must correspond the the
safety regulations of the fore, to check the submersible
motor pump regularly (by carrying
power plants and they must
work faultessly. out start-up tests).
 The electrical connections must The floater is adjusted in a way that
the pump can immediately be star-
be protected from moisture.
 If there is danger of looding, the ted
electrical connections must be
Note!
taken to higher ground.
 Circulation of aggressiv fluids,
The pump shaft should have mini-
as well as the circulation of
mum dimensions of 40 x 40 x 50
abrasive materials must be avoi-
cm, so that the floating switch can
ded at all costs.
move freely.
 The submersible motor-driven
pump must be protected from
Mains supply
frost.
Your new submersible pump is
 The pump must be protected
equipped with a shock-proof plug
from running dry.
according to regulations. The
Access on the part of children
pump is designed to be connect-
should also be prevented with
ed to a 220/230 V ~ 50 Hz safety
appropriate measures.
socket.
Make sure that the socket is suffi-
ciently secured (min. 6 Amp.) and
is in excellent condition. Introduce
the plug into the socket and the
pump is ready to go.
21.10.2003 10:40 Uhr
Important Note!
If the mains cable or plug suffers
any damage from external action,
repairs to the cable are prohibited.

Important!

This work may only be performed
by a qualified electrician or your
ISC GmbH Customer Service.
Areas of use
This pump is used primarily as cel-
lar pump. When installed in a shaft,
this pump provides protection from
flooding.
They are also used wherever water
has to be moved from one place to
another, e.g. in the home, agricul-
ture, horticulture, plumbing and
many other applications.
Setting to work
After having read these instructions
carefully, you can set your pump to
work, reconsidering the following
items:
 Check if the pump rests on the
ground of the shaft.
 Check of pressure cord has
been attached properly .
 Check if electrical connection is
230 V ~ 50 Hz.
 Check if socket is in good
condition.
 Make sure that water and humi-
dity can never come to the
mains supply.
 Avoid pump running dry.
Maintenance guidelines
This submersible pump is an
approuved, maintenance-free high
quality product, which is subject to
severe final controls.
We recommend, regular inspection
and maintenance to ensure long
equipment life and uninterrupted
operation.
Seite 5
GB
5