HQ Power VDSCD3000 Notice D'emploi page 8

2.
The pause indicator lights during pause or cue mode.
3. CUE
Lit when the unit is at a cue point.
4. FUNCTION INDICATORS
Indicators 1 ~ 4 detail a cue point stored into the memory, indicators 5 ~ 10 detail which effect is active.
5. SINGLE
Shows you when the unit is set to play just one track at a time. When it is not lit the CD will play
continuously through all tracks. The function is controlled by the SGL button.
6. ELAPSED, TOTAL REMAIN
Elapsed, total remaining or single song remaining time.
7. LOOP
Shows you when the CD is repeating a particular area with the music on the CD.
8. RELOOP
Shows you when the CD has had a loop set previously and can go back to loop again.
9. TRACK
10. TRACK NUMBER
This shows you which track is playing.
11. MINUTES
Time indication of the track that is playing.
12. SECONDS
Time indication of the track that is playing.
13. FRAME
Time indication of the track that is playing.
14. BPM
Indicates the current BPM and effect information.
15. PITCH / BPM
Shows you the percentage change in pitch or BPM of the song depending on the mode selected with the
BPM button.
16. PITCH
This indication shows you the percentage of the pitch.
17. TIME BAR
Shows you the time remaining or elapsed depending on the setting of the time button.
18. ANTI-SHOCK AND BUFFER INDICATOR
The memory status is represented on the display by a bucket being filled or emptied. The bucket itself
represents the instant start function by the buffer memory. A flashing bucket represents 5 seconds of anti-
shock protection. There is up to 20 seconds of anti-shock available.
7. Use
• OPEN / CLOSE
Press the open / close button to load or eject a disc.
• LOADING DISCS
Put the disc in the disc tray and press the open / close button.
• SELECTING TRACKS
Select the desired track using the numeric buttons, press the track search buttons once to select the previous
or the next track or maintain the track buttons pressed to change tracks continuously at a higher speed. When
a new track is selected during playback, playback begins as soon as the search operation is completed.
• STARTING PLAYBACK
Press the play / pause button during the pause mode or cue to start playback.
• STOPPING PLAYBACK
There are 2 options to stop playback:
o Press the play / pause button during playback at the desired point.
o Press the cue button during playback to return to the position at which playback started (back cue).
VDSCD3000 8 HQ POWER