HQ Power VDSCD3000 Notice D'emploi page 6

1. DIRECT TRACK ACCESS BUTTON
When the function is engaged (LED on), it may be used as direct track access buttons. When not (LED off),
it may be used as the effect and cue control button.
2. SGL BUTTON
You can choose between a single track to play and all tracks by pressing once or twice.
3. TIME BUTTON
This button switches between elapsed playing time, remaining time and total remaining time on the disc.
4. MEMORY BUTTON
This button allows you to program up to 4 cue points on the CD. The player cues up the selected points
when memory LED is off.
5. TRACK NUMBER BUTTONS
These buttons control 2 functions depending on the direct track access button mode you are working in.
While direct track access LED is on, the number buttons are for quickly advancing to the track on a CD.
The number buttons are assigned to cue 1, cue 2, cue 3, cue 4, hold, brake and coast, filter 1, filter 2,
reverse play functions while direct track access LED is off.
6. LCD DISPLAY
Indicates all the functions as they are occurring with the CD.
7. PITCH LOCK
This function will allow you to make adjustments to a track speed using the pitch control without altering a
track perceived tonal pitch. When pitch lock is on, the pitch LED is flashing.
8. PITCH BUTTON
This button is used to turn the pitch function on and off. The pitch percentage value can be changed from
+/- 8%, +/- 12% or +/- 16%. The LED will indicate the maximum pitch value by green for 8%, orange for
12% or red for 16%.
9. PITCH BEND +/- 16% (BUTTON)
The pitch will automatically rise while + button is pressed and return to the original pitch when the button is
released. The pitch will automatically drop when the – button is pressed and return to the original pitch
when the button is released.
10. OPEN / CLOSED BUTTON
Press to load or eject the disc. This will not work when playing.
11. SEARCH WHEEL (OUTER WHEEL)
This wheel has a speed position for searching through songs. The more you turn the wheel in one direction
the faster you search through the music.
12. JOG WHEEL (INNER WHEEL)
1. The jog wheel will act as a slow frame search control when the CD is paused or set to a cue point. To
set a new frame cue point, spin the wheel and press play when you have determined the proper
position. Press cue to return to the "cue point".
2. The jog wheel temporally bends the pitch of the music up to +/- 16 if the song is already playing. The
amount of the pitch change is determined by the speed of rotation.
13. IN / R. CUE
This allows you to set the cue point without stopping the playback. This button also sets the beginning of a
seamless loop.
14. TRACK
These buttons are used to select the track to be played. Forward skip and back skip.
15. OUT / EXIT
This button is used to set the ending when looping the music. The player will start to loop continuously until
you press this button again.
16. CUE
Pressing the cue button during play provides a return to position at which playing was started. With the unit
in pause mode (play/pause LED is blinking) the search and/or jog wheel is used to set a different start
point. By pressing the play/pause button and then the cue button, you can confirm this new cue point is
desirable. The cue LED will light up since the cue button is pressed until the CD has returned to the
position at which play was started.
VDSCD3000 6 HQ POWER