Installation - switel DCIP 49S Mode D'emploi

3 Installation

Introduction
VolP (Voice over Internet Protocol) is a technology which uses the Internet to
transmit telephone conversations.
Analogue voice signals are compressed and converted to a digital form. These
digital signals are transmitted via computer networks or the Internet.
Under the corresponding conditions, VolP can be used to telephone free of charge. It
may only be necessary for payment to cover the costs of your Internet provider!
As a result, VolP represents an interesting alternative to traditional telephony.
This telephone is a USB−based VoIP telephone which only needs to be con-
nected to your PC in order to carry out VolP telephone calls.
The Skypet application software is required in order to operate the telephone.
The current Skypet version is available for downloading from www.skype.com.
To do this, the PC must have an Internet connection.
Install the Skypet application first, before carrying out the following
steps.
Connecting the telephone to a PC
Operating system: Windows XP or Windows 2000
S
Switch the PC on.
S
Deinstall any existing VoIP drivers.
S
Insert the CD in the drive.
The installation program starts up automatically.
If the installation program does not start automatically, navigate to the
CD drive and double−click on the Setup application.
S
Follow the instructions which appear on the screen until the installation is
completed.
S
Initiate a new start in order that the modifications take effect.
S
Connect the USB socket on the base station and a USB socket on the PC
using the USB cable contained in the material supplied. The system
automatically detects the new component and configures it. Wait for the
configuration routine to finish.
S
Check the settings described in Chapter Configuration, if necessary.
Installation
141