Equaliser; Language; Software Update; Software Version - PERFECTPRO Teambox TBX1 Manuel De L'utilisateur

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

EQUALISER

The sound on Teambox can be adjusted to suit your personal taste for the material that
you are listening to.
1.
Press the Power button to switch on the radio.
2.
Press the EQ button to display current menu.
3.
Press the Tuning << or Tuning >> button to select
Neutral → Rock → Indoor → Jazz → Outdoor
Press the Select / Info button to confirm.
4.

LANGUAGE

The radio can be configured to a different language.
1.
Press the Power button to turn on the radio.
Press the Menu button, and then Press the Tuning << or Tuning >> button until
2.
the display shows "System settings".
3.
Press the Select / Info button; Press the Tuning << or Tuning >> button until the
display shows "Language".
4.
Press the Select / Info button to enter the language adjustment menu.
5.
Press the Tuning << or Tuning >> button until the desired language appears on
the display (default is English).
6.
Press the Select / Info button to confirm your choice. The display will change to
the chosen language.

SOFTWARE UPDATE

From time to time, new software features for your radio may be developed. Teambox
has therefore been designed to allow its internal software to be updated using USB
connection.
You should not attempt to update your radio unless it is recommended to you by
Customer Services. Updating the software may remove all radio station presets from
Teambox.
21

SOFTWARE VERSION

The software display cannot be altered and is just for your reference.
1.
Press the Power button to turn on the radio.
2.
Press the Menu button, and then Press the Tuning << or Tuning >> button until
the display shows "System settings".
3.
Press the Select / Info button; Press the Tuning << or Tuning >> button until the
display shows "SW version".
Press the Select / Info button to view the software version.
4.

FACTORY RESET

If the radio fails to operate correctly, or some digits on the display are missing or
incomplete, carry out the following procedure.
1.
Press the Power button to switch on the radio.
2.
Press the Menu button.
3.
Press the Tuning << or Tuning >> button until the display shows "System
settings" and press the Select / Info button.
4.
Press the Tuning << or Tuning >> button until the display shows "Factory reset"
and press the Select / Info button.
5.
Press the Tuning << or Tuning >> button to select between "Yes" or "No".
Select "Yes" if you wish to reset the radio, otherwise, select "No".
6.
Press the Select / Info button to cause the factory reset.
7.
A full reset will be performed. All presets and the station list will be erased. All
settings will be set to the default values.
After a brief stop, the radio will complete reset and automatically perform an auto scan
of the Band III DAB channels and the FM band.
In case of malfunction due to electrostatic discharge; reset the product as above to
resume normal operation. If you are not able to perform the reset operation as above,
remove and reconnect the power supply.
GB
GB
22

Publicité

Table des Matières
loading

Table des Matières