Components List - Sportplus SP-HG-010 Mode D'emploi

CAUTION – PRODUCT DAMAGE
• Do not alter the product in any way and use only original replacement parts. Have
all repairs carried out in a professional workshop or from similarly qualified persons -
improper repairs can lead to serious risks for the user. Use the product for the
intended purposes as described in this user manual only.
• Shield the product from spraying water, moisture, high temperatures and direct
sunlight.
• Do not use aggressive or abrasive cleaning agents for cleaning the product.
INFORMATION ON ASSEMBLY
• Assembly of the product must be carried out carefully by an adult person. Ask for the
assistance of another, technically-skilled person in case of doubt.
• Before beginning assembly of the product, read all assembly steps carefully and
review the diagram.
• Remove all packaging materials and place all individual components on a free
surface. This will give you a good overview and simplify assembly. Shield the
assembly surface from filth and scratching by laying down suitable padding.
• Check the components against the components list to make sure all are present. Do
not dispose of the packaging materials until assembly is complete.
• Please note that there is always a risk of injury when using tools to carry out manual
tasks. Therefore, please exercise caution when assembling this product.
• Make sure your work environment is hazard-free. For example, do not leave any
tools lying around. Place the packaging materials somewhere where they will not
pose any hazards during assembly. Packaging foil or plastic bags pose a suffocation
hazard for children!
• After assembling the product according to the instructions, make sure that all
screws, bolts and nuts are installed correctly and tightened.
• If necessary, lay out protective padding (not included) beneath the product to protect
your floor as there is no guarantee that, for instance, the rubber feet will not leave
marks behind.
SP-HG-010-IM-DE+GB+FR-02.indb 18-19
18

3. COMPONENTS LIST

No. Description
1 Lift arm mount
2 Vertical standpipe
3 Pulley mount bracket
4 Back bottom frame
5 Left pulley mount
6 Right pulley mount
7 Weight guide tubes
8 Right butterfly brace
9 Left butterfly brace
10 Support frame
11 Front base frame
12 Metal handles
13 Pull bar
14 Top weight plate
15 Select rod
16 Weight plate
17 Support plate
18 Chest press
19 Arm padding (L: 250 mm)
20 Seat tube
21 Reversible pulley mount
22 Pulley mounting plates
23 Cross brace (L: 385 mm)
24 Cross brace (L: 425 mm)
25 Biceps padding support frame
26 Leg extension mount
27 Upper pulley tube
28 Back cushion
29 Seat cushion
30 Pulley
31 Sleeve (14 x 11 x 13 mm)
32 Knurled screw for locking pin
33 Biceps padding
34 Padded ankle strap
35 Quick pin
36 Weight-mounting sleeve
37 PVC pad
38 Cylindrical rubber sleeve
39 Upper weight plate washer
Quantity
1
1
1
1
1
1
2
1
1
1
1
2
1
1
1
11
1
1
2
1
1
2
1
1
1
1
1
1
1
12
4
1
1
1
1
1
2
2
1
19
10/6/2016 3:11 PM