Sony PFM-42B1 Mode D'emploi page 79

Preset input signals
Signal name
Computer signals
1 VGA a) -1 (VGA 350)
2 640×350@85Hz (VESA b) STD)
3 640×400@85Hz (VESA STD)
4 640×480@60Hz (VESA STD)
c)
5 Mac 13"
6 640×480@72Hz (VESA STD)
7 640×480@75Hz (VESA STD)
8 640×480@85Hz (VESA STD)
9 852×480@60Hz (I·O DATA)
10 VGA (VGA TEXT)
11 720×400@85Hz (VESA STD)
12 800×600@56Hz (VESA STD)
13 800×600@60Hz (VESA STD)
14 800×600@72Hz (VESA STD)
15 800×600@75Hz (VESA STD)
16 800×600@85Hz (VESA STD)
17 Mac 16"
18 1024×768@60Hz (VESA STD)
19 1024×768@70Hz (VESA STD)
20 1024×768@75Hz (VESA STD)
21 1024×768@85Hz (VESA STD)
22 1152×864@75Hz (VESA STD)
23 Mac 21"
24 1280×960@60Hz (VESA STD)
25 1280×960@85Hz (VESA STD)
26 1280×1024@60Hz (VESA STD)
27 1280×1024@75Hz (VESA STD)
28 1280×1024@85Hz (VESA STD)
29 1600×1200@60Hz (VESA STD)
30 856×480@60Hz (Matrox) e)
31 856×480@59.6Hz (Matrox)
32 856×480@60.1Hz (Matrox)
SDTV/HDTV
1 PAL
2 NTSC
3 SECAM
4 NTSC4.43
5 PAL60
6 PAL-M
7 575/50i
8 480/60i
9 1080/24psf
10 1080/50i
11 576/50p
12 480/60p
13 1080/60i
14 720/60p
Color system or horizontal/
vertical frequency
31.5kHz 70.1Hz
37.9kHz 85.1Hz
37.9kHz 85.1Hz
31.5kHz 59.9Hz
35.0kHz 66.7Hz
37.9kHz 72.8Hz
37.5kHz 75.0Hz
43.3kHz 85.0Hz
d) 31.7kHz 60.0Hz
31.5kHz 70.1Hz
37.9kHz 85.0Hz
35.2kHz 56.3Hz
37.9kHz 60.3Hz
48.1kHz 72.2Hz
46.9kHz 75.0Hz
53.7kHz 85.1Hz
49.7kHz 74.6Hz
48.4kHz 60.0Hz
56.5kHz 70.1Hz
60.0kHz 75.0Hz
68.7kHz 85.0Hz
67.5kHz 75.0Hz
68.7kHz 75.1Hz
60.0kHz 60.0Hz
85.9kHz 85.0Hz
64.0kHz 60.0Hz
80.0kHz 75.0Hz
91.1kHz 85.0Hz
75.0kHz 60.0Hz
30.2kHz 60.0Hz
e)
30.1kHz 59.6Hz
e) 30.1kHz 60.1Hz
PAL
NTSC
SECAM
NTSC/4.43
PAL/60
PAL-M
575/50I
480/60I
1080/48I
1080/50I
576/50P
480/60P
1080/60I
720/60P
a) VGA is a registered trademark of International Business
Machines Corporation, U.S.A.
b) VESA is a registered trademark of the Video Electronics
Standards Association.
c) Mac (Macintosh) is a registered trademark of Apple
Computer, Inc.
d) This item is only available when you use a graphic
accelerator board manufactured by I·O DATA DEVICE,
INC.
e) This item is only available when you use a graphics card
manufactured by Matrox Graphics Inc.
Notes
• When inputting an HDTV signal, input the tri-level
sync signal to the 2nd pin of the INPUT1 or INPUT2
(D-sub 15-pin) connector.
• When inputting a computer signal at the resolution
shown in item No. 29, set H SIZE, H SHIFT, V
SIZE and V SHIFT to the standard (00) and set
ZOOM to ×1 in the PIC SIZE menu, or the picture
might oscillate.
• If the image color is too light after inputting the
DVD signal in the PFM-42B1/42B1E, adjust the
color in the "CHROMA" setting in the PIC
CONTROL menu.
In the PFM-42B2/42B2E, select "SMPTE" in YUV
LEVEL in the CONFIG menu.
• For 480/60p, input it using a YUV signal. If you
input an RGB signal, the system will determine the
frequency to be a VGA signal, it will display at
31.5kHz/59.9Hz, the screen phase will be off, and
compared to YUV input, the resolution will be
reduced. To address problems with screen phase, use
the H SHIFT and V SHIFT items on the Signal
Adjustment menu, or use the H SHIFT, V SHIFT
and SELECT buttons on the RM-42B Remote
Commander to make the necessary adjustments.
• When inputting a DTV signal (No.7 to No.14), input
it using a YUV signal.
Actual on-screen display of the unit's status
On-screen display Significance
31.5kHz / 59.9Hz (e.g.) The selected input signal is
computer RGB.
480 / 60I (e.g.) The selected input signal is
component video.
NTSC (e.g.) The selected input signal is NTSC.
OTHERS The input signal is out of the
capture range.
NO SYNC There is no input signal.
INPUT1 RGB The signal mode of INPUT1 is set to
RGB.
INPUT1 YUV The signal mode of INPUT1 is set to
component video.
VIDEO COMPOSITE Composite video input is selected
for VIDEO.
VIDEO Y/C Y/C video input is selected for
VIDEO.
Watching the Picture
27
(GB)