Putting Into Operation; Inserting Batteries Into The Remote Control - Vitalmaxx 07125 Mode D'emploi

EN

Putting Into Operation

PLEASE NOTE!
■ WARNING – Danger of Suffocation! Keep children and animals away from the
packaging material.
■ CAUTION – Danger of Injuries! Each time before you start using the device, make
sure that there is suffi cient clearance around the device so that you cannot bump into
walls, furniture, etc. during use.
■ Only ever place the device on a dry, even and fi rm surface. If you use the device on
a carpet, make sure that the ventilation openings on the bottom of the device remain
clear.
■ Protect sensitive fl oor coverings on which the device is placed with a mat if neces-
sary.
1. Unpack all parts and check the items supplied for completeness (see chapter "Items
Supplied" on page 16) and transport damage. If you fi nd any damage to the com-
ponents, do not use them (!), but contact the customer service department.
2. Insert batteries into the remote control (see below).
3. Place the device on a level fl oor surface. Make sure that it is a suffi cient distance from
walls or furniture etc. on all sides so that you have enough space for your workout.
5. First connect the mains cable to the socket of the device and then to a properly in-
stalled, easily accessible plug socket. The mains voltage must match the technical
data on the rating plate of the device. Ensure that it is not possible for others to trip
over the connected mains cable or the device itself.

Inserting Batteries into the Remote Control

• Replace the batteries when the performance of the remote control starts to wane.
07125_de-en-fr-nl_A5_V2_2.indb 18 07125_de-en-fr-nl_A5_V2_2.indb 18
18
4. If you want to use the expander bands, turn the device
over so that the bottom is pointing upwards. Attach the
spring hooks to the mounting eyelets. Then place the de-
vice back on its feet. Otherwise continue with the next
step.
1. Open the battery compartment on the back of the remote
control: Press the catch toward the battery compartment
cover and remove the cover.
2. Insert two 1.5 V batteries of the AAA type into the battery
compartment. Pay attention to the correct polarity (+/-).
3. Replace the battery compartment cover and fl ip it shut.
09.07.2018 09:16:03 09.07.2018 09:16:03