Trevi XF 1550 KB Mode D'emploi Et Branchement page 13

ENGLISH
TWS FUNCTION OPERATION
True wireless stereo (TWS) technology
TWS technology enables user to make wireless connection between two speakers which are same model and compatible with
TWS. In TWS connection, two speakers will be automatically grouped to be a Stereo- Speaker System which outputs the left and
right channel.
HOW TO ESTABLISH
Notice: Two speakers must be same model and both compatible with TWS.
1. Please switch on both speakers and select "Bluetooth" mode;
2. Press "TWS" button (5) of one of the speakers until hearing a "beep". It becomes the main speaker (left chennel), which will
automatically search and connect with another speaker (right channel). After connection, you will hear a "beep";
3. Connect mobile phone or Bluetooth player to the speaker by Bluetooth. After connection, you can play music with the TWS
Stereo- Speaker System.
TWS function operates in TWS mode, manipulations to the main speaker will be simultaneously effected in another speaker. For
example, volume adjustement, previous and next song selection, play and pause, power on and off.
Note:
- If the 2 loudspeakers are not paired, switch off both devices and repeat steps 1, 2 and 3.
- The TWS function only works between equal speakers or with other speakers that use the same micro processor or solution.
INPUT USB/MICRO SD
1. Switch On the appliance;
2. Insert a USB memory or an Micro SD card in the corresponding entries (23/24). Playback starts automatically;
3. To pause playback, press the
"PAUS";
4. To resume playback, press the
:
5. Press (10) button on unit
9
Press the (8) button on unit
6. Using the numeric keypad (14) on remote control you can directly enter the number of the song you want to play;
7. Press button (9) on remote control, the display will show "ONE" (to reproduce the same track continuously); press it
a second time, the word "ALL" will appear on the display (to continuously play all the tracks contained in the USB/Micro SD
device);
8. Use the FL- (2) and FL + (7) buttons on the remote control to select the folder (if any) containing the desired tracks.
Note:
- The player may not support some USB/Micro SD devices, this is due to the incompatibility of some processors.
- To avoid harmful interference, always connect USB devices directly to the unit, do not use extension cords.
- From the computer to format the USB memory/SD FAT (16 or 32).
AUX-IN
1. Switch on the unit and select the "AUX" function;
2. Connect any unit equipped with audio output, through a cable 3.5mm jack to the AUX IN (20);
3. Use the external device from their commands.
BATTERY AUXILIARY CONNECTION
The appliance is set up to connect an auxiliary battery if you were with the internal battery completely empty and there was no
possibility of connecting the appliance to a mains socket.
Use the socket (19) using the appropriate cable provided, connect it to an external 12V battery making sure to respect the
indicated polarities.
USING THE WIRELESS MICROPHONE
1. Remove the cover on the back of the Microphones, insert 2 "AA" batteries into each microphone paying attention to the
polarities indicated and close the cover again;
2. Turn on the microphone by moving the center switch upward. If the power indicator flashes or does not light up, check if the
batteries are charged and if they have been inserted with the correct polarity;

(9) button on the unit or the key

(9) on the unit or on the remote control (11);
:
or (12) button on remote control while listening to switch to the next track.
9
or (4) button on remote to go to the previous tracks;

(11) on remote control, the display will show
13
XF 1550 KB