INSTALLATION
Connection
Electric connection
The mains power supply must correspond to the rating indicated on the
plate situated inside the hood.
If provided with a plug connect the hood to a socket in compliance with
current regulations and positioned in an accessible area.
If not fitted with a plug (direct mains connection) or if the plug is not
located in an accessible area apply a double poled switch in accordance
with standards which assures the complete disconnection of the mains
under conditions relating to over-current category III, in accordance with
installation instructions.
Warning! Before re-connecting the hood circuit to the mains supply and
checking the efficient function, always check that the mains cable is
correctly assembled.
The hood is provided with a special power cable ; if the cable is
damaged, request a new one from Technical Service.
EN 13