Pelgrim RSK861RVS Notice D'utilisation page 62

USE
EN 8
Switching on the grease saturation indicator for the activated
carbon filter
1. Switch off the extractor hood and press and hold the on/off and
timer buttons simultaneously for 3 seconds.
The L1 and L2 indicators will start to flash for 5 seconds.
Switching off the grease saturation indicator for the activated
carbon filter
1. Switch off the extractor hood and press and hold the on/off and
the timer buttons simultaneously for 3 seconds.
The L1 indicator will start to flash for 2 seconds.
Thermal cut-out
• The hood is supplied with a temperature sensor that switches the
motor to speed 3 if the temperature near the controls becomes too
hot.
• This is indicated by the L1, L2, L3 indicators that start flashing. This
situation will continue until the temperature has dropped to a safe
level.
• To exit this mode press the on/off or fan settings button.