EUROM Force 1218 Ash Cleaner Metal Manuel D'instruction page 30

Follow the procedure below to mount the wheel support simply and solidly:
1. Hold the wheel support on the outer edge at the bottom of the boiler as
shown in photo and press the outside of the wheel support down in the
direction of the arrow.
2. Press one end of the wheel support firmly down.
3. Press the other end of the wheel rest firmly down.
4. Press the lock on one side of the wheel support under the outer edge of the
boiler.
5. Press the lock on the other side of the wheel support under the outer edge of
the boiler.
6. Now press the 3 wheels into the wheel supports.
 Check whether the HEPA filter (9) has been positioned correctly.
 Replace the motor cover (3) on the boiler (5) and close both clamps (10).
 - If you want to vacuum up ash, connect the hose to hose connection 4.
- If you want to blow, connect the hose to hose connection 1.
Insert the hose (7) as far as possible into the hose connection (1 or 4): turn
slightly if necessary until the catch falls into the hollow. Then turn a quarter turn
clockwise.
 Then connect the nozzle (8) to the hose (7) with a circular motion.
Operation
 Check that the boiler and the HEPA filter are clean and that the device has been
correctly and completely assembled as described in the user manual.
 Take into account all safety warnings on the device and in the operating
instructions.
 Plug it into the socket.
 Press the on button (I) to switch on the vacuum cleaner (press the
button (O) to switch off the vacuum cleaner).
 The device is suitable for extracting cold ash from fireplaces, wood or coal
stoves, ash drawers and grills. Ash with a temperature higher than 40°C must
never be vacuumed! Cold ash has had sufficient time to cool down and contains
no glowing embers, hot residues or objects in which the fire has not been
completely extinguished; check through the ash (using a metal tool) before you
start vacuuming! Cold ash no longer produces palpable heat. Only vacuum ash
from conventional fuels.
 Do not use the device without a properly installed filter.
30