Changing Basic Settings; Cleaning And Servicing; Cleaning Products - NEFF T16BT 6 Série Manuel D'utilisation

Masquer les pouces Voir aussi pour T16BT 6 Série:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

en Cleaning and servicing
Dis-
Selection
play
Activation of the heating elements
– Switched off
– Switched on
– The last setting before switching off the
hotplate.
Time for selecting hotplates
– Unlimited: The last hotplate selected can
always be adjusted without having to select it
1
again.
– You can adjust the last hotplate selected
within 10 seconds after selecting it. After this
time you have to select the hotplate again be-
fore adjusting it.
Resetting to the factory settings
– Switched off.
– Switched on.
1
Factory setting (may vary according to model)
13.2 Changing basic settings
Requirement: The hob is switched off.
Switch on the hob.
1.
14 

Cleaning and servicing

To keep your appliance working efficiently for a long
time, it is important to clean and maintain it carefully.
14.1 Cleaning products
You can obtain suitable cleaning products and glass
scrapers from customer service, the online shop or a
retailer.
ATTENTION!
Unsuitable cleaning products may damage the sur-
faces of the appliance.
Never use unsuitable cleaning products.
Unsuitable cleaning products
¡ Undiluted detergent
¡ Detergent intended for dishwashers
¡ Abrasive cleaners
¡ Aggressive cleaning products such as oven spray
or stain remover
¡ Abrasive sponges
¡ High-pressure or steam jet cleaners
38
1
1
Within the next 10 seconds press and hold
2.
approx. 4 seconds.
appears.
a
lights up on the hotplate display.
a
Touch
repeatedly until the required display ap-
3.
pears.
Set the desired value using the twist knob.
4.
Press and hold
for 4 seconds.
5.
a The setting is activated.
Tip: To exit the basic settings, switch off the hob using
. Switch the hob on again and reset.
14.2 Cleaning the glass ceramic
Clean the hob after every use to stop cooking residues
from getting burnt on.
Note: Note the information on unsuitable cleaning
products. → Page 38
Requirement: The hob has cooled down.
Remove heavy dirt using a glass scraper.
1.
Clean the hob with a cleaning product for glass
2.
ceramic.
Follow the cleaning instructions on the product
packaging.
Tip: You can achieve good cleaning results if you
use a special sponge for glass ceramic.
14.3 Cleaning the hob surround
Clean the hob frame after use if dirty or stained.
Notes
¡ Note the information on unsuitable cleaning
products. → Page 38
¡ Do not use the glass scraper.
for

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

T16 t 6 sérieT17 t 6 série

Table des Matières