Manual Settings - TFA 60.2528 Mode D'emploi

TFA_No. 60.2528_Anleitung_06_18
BINGO - Radio-controlled alarm clock
7. Operation
• Press and hold – or + button in the setting mode for fast running.
• The instrument will automatically quit the setting mode if no button is
pressed within 15 seconds.
• If the button tone is enabled, each button operation is acknowledged
with a beep.

7.1 Manual settings

• Press and hold SET button at the back in normal mode for three seconds.
• dcF appears on the display and ON (default) will be flashing. If the
DCF reception is activated and after successful reception of the DCF
signal no manual adjustment is necessary.
• Press the – or + button if you want to deactivate the DCF reception
(OFF).
• Confirm the setting with the SET button.
• If the DCF reception is enabled (ON), you can set the time zone after
confirmation with the SET button (TZ appears on the display and 0
default will be flashing).
• Press the – or + button to adjust the time zone (-9/+9).
• The time zone setting is needed for countries where the DCF signal
can be received but the time zone is different from the DCF time (e.g.
+1=one hour later).
26
08.06.2018 9:06 Uhr Seite 14
BINGO - Radio-controlled alarm clock
• Confirm the setting with the SET button.
• Press the SET button to make the settings in the following sequence:
• Confirm the setting with the SET button.
• By a successful reception of the DCF reception signal and if the DCF
7.1.1 Setting of the temperature unit
• Press the – or + button to toggle between Celsius (°C) or Fahrenheit
• Confirm the setting with the SET button.
7.1.2 Setting of the day-of-week language
• Adjust the desired day-of-week language with the – or + button: Ger-
• Confirm the setting with the SET button.
7.1.3 Setting of the button tone
• Normally the button tone (beep) is disabled (OFF).
the hours, the minutes, the year, the month, the day, the temperature
unit (default °C), the day-of-week language (default German), and the
button tone (default OFF). Press the – or + button to adjust it.
reception is activated (ON), the manually set time will be overwritten.
(°F) as temperature unit select.
man (D), English (EN), French (FR), Spanish (ES), Italian (IT) or
Dutch (NL).
27