Sennheiser HMEC 26-2 Notice D'emploi page 53

Product and cable variants
Product and cable variants
The following cables, connectors, control units and features are
available for the HMEC 26-2 variants (see table on the following
pages:
1
Headphones with +6 dB characteristic SPL
2
Microphone BKE 46 with 80 mV/Pa output voltage
3
Microphone BKE 46-1 with 60 mV/Pa output voltage
4
Single-sided round cable, length approx. 1.65 m
5
XLR-5 connector
6
¼" (6.3 mm) jack plug (headphones)
7
PJ-068 equivalent (microphone)
8
8-pin Neutricon connector
9
6-pin Redel connector
<
XLR-6 connector
A
XLR-3 connector
B
Aircraft powered
C
Battery powered
D
Control unit I (see page 8)
E
Control unit II (see page 9)
F
Audio cable (with 3.5 mm jack plugs)
G
Belt clip
H
Carry bag
HMEC 26-2 | 21