Technical Data; Accessories And Spare Parts; Transport And Storage; Installation - oventrop Unibox ERTL Notice D'utilisation

Unibox E RTL

3.5 Technical data

Operating temperature ts
Operating pressure ps
Differential pressure
Installation depth
Medium
4. Accessories and spare
parts
Spare parts and accessories are available from
specialist stores.
The following items are available as accessory:
Name
Cover plate White plastic
White glas
Black glas
"Unibox T" conversion kit
Installation duct
Forming shaft
Duo connector
Protective pipe (see Illustr. 5 on
page 30)
102273180-V02.06.2019
5.
Transport the product in its original packaging.
max. 100 °C
The product must be stored under the following
max. 10 bar
conditions:
max. 1 bar
Temperature
57 mm
range
water, water/
Relative air
glycol mix-
humidity
ture
Particles
Mechanical
influences
Radiation
Chemical
influences
Item no.
1022766
1022764 6.
1022765

6.1 General installation advice

1022639
Note the following prior to installation:
1022652
• The bottom edge of "Unibox E RTL" must
1022653
be at least 20 cm above the completed
1022650
flooring.
1022655
• The front edge of "Unibox E RTL" must be
at the same level as the completed wall.
1501184
• The opening of the wall installation kit must
face downwards.
• The valve must not be influenced by exter-
nal energy.
• Use the attached bracket to align and
secure "Unibox E RTL".

Accessories and spare parts

Transport and storage

-20 °C to +60 °C
Max. 95 %
Dry and free from dust
Protected from mechani-
cal agitation
Protected from UV rays
and direct sunlight
Do not store together
with solvents, chemicals,
acids, fuels or similar
substances

Installation

If the wall has not been completed,
note the design specified by plaster
and tiles.
29